Maintenance and Care:
Never use the device if it is not completely closed.
Before each use, check the device and its accessories for
damage to the insulation, cracks, kinks and breaks. If in
doubt, do not take any measurements.
Change the battery when a battery symbol is displayed to
avoid incorrect readings.
Switch off the measuring device before changing batteries
or fuses and also remove all test leads and temperature
probes.
Replace defective fuses (if present) only with a fuse that
corresponds to the original value. Never short-circuit a
fuse or fuse holder.
Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially
available mild household cleanser. Ensure that no water gets
inside the equipment to prevent possible shorts and damage to
the equipment.
1.1. Safety Symbols
Caution! Refer to accompanying documents!
Caution! Risk of electric shock.
37