292 / 330
Bosch Rexroth AG
Service and repair
10.3
Firmware update
Software tools
|
Electric Drives
and Controls
Upon delivery, the most current firmware is installed on the timer. You
may display the firmware version using the programming terminal
(BOS).
In rare cases, it may be necessary to update the firmware.
Arbitrary and improper firmware replacement
Damages possible through improper handling!
Therefore, firmware updates may only be performed at our
"
request and by authorized personnel only!
The following software tools are available for firmware update:
• WinBlow (refer to Sect. 10.3.1, starting on page 293):
For firmware update of PST 6x00.xxx timer types via interface X1.
• FWUpdate (refer to Sect. 10.3.2, starting on page 294):
For firmware update of all timers via the Ethernet field bus interface.
PST 6xx0
NOTICE
|
1070080029 / 05