Inhaltszusammenfassung für Bosch Rexroth PST 6.321 Serie
Seite 1
Electric Drives Linear Motion and and Controls Hydraulics Assembly Technologies Pneumatics Service Rexroth PST 6xxx.321 R911172803 Edition 04 Schweißsteuerung mit Thyristor-Leistungsteil Weld Timer with Thyristor Power Unit Typspezifi sche Anleitung | Type-Specifi c Instructions...
Seite 2
Eigenschaften. Die Angaben entbinden den Verwender nicht von eigenen Beurteilungen und Prüfungen. Unsere Produkte unterliegen einem natürlichen Verschleiß- und Alterungsprozess. Alle Rechte bei Bosch Rexroth AG, auch für den Fall von Schutzrechtsanmeldungen. Jede Verfügungsbefugnis, wie Kopier- und Weitergaberecht, bei uns.
R911172803 | PST 6xxx.321 Bosch Rexroth AG 5/48 Zu dieser Dokumentation Zu dieser Dokumentation Gültigkeit der Dokumentation Diese Dokumentation gilt als Ergänzung für die Anleitung Rexroth PST 6xx0 Schweißsteuerung mit Thyristor-Leistungsteil. Der Inhalt bezieht sich auf den Anschluss (Netzversorgung) ...
6/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Zu dieser Dokumentation Darstellung von Informationen Damit Sie mit dieser Dokumentation schnell und sicher mit Ihrem Produkt arbeiten können, werden einheitliche Sicherheitshinweise, Symbole, Begriffe und Abkürzungen verwendet. Zum besseren Verständnis sind diese in den folgenden Abschnitten erklärt.
R911172803 | PST 6xxx.321 Bosch Rexroth AG 7/48 Sicherheitshinweise Sicherheitshinweise Dieses Kapitel enthält wichtige Informationen zum sicheren Umgang mit dem beschriebenen Produkt. Die Sicherheitshinweise sehen Sie bitte unter Tab. 1: Erforderliche und ergänzende Dokumentationen Rexroth PST 6xx0 Schweißsteuerung mit Thyristor-Leistungsteil nach.
Seite 9
R911172803 | PST 6xxx.321 Bosch Rexroth AG 9/48 Anschlussplan Abb. 2: Ein-/Ausgangsbaugruppe...
Seite 10
10/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Anschlussplan Abb. 3: Anschlussbeispiele...
Seite 11
R911172803 | PST 6xxx.321 Bosch Rexroth AG 11/48 Anschlussplan PST 6100 L / W PST 6250 L / W Netz Netz 400VAC - 400VAC - 600VAC 600VAC max. 50 mm max. 95 mm Schweiß- Schweiß- Transformator Transformator max. 50 mm max.
16/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Ablaufdiagramme Ablaufdiagramme <Start_1> <Programmanwahl> <Extern Zündung ein> <Fehler rücksetzen> Fehler rücksetzen mit FK Eingang Bit 5 <Fehler rücksetzen mit Ablaufwiederholung> <Analoger Druck Ausgang> <Fortschaltkontakt FK> (Start/Dauer vor Ende NHZ programmierbar) <Schweißfehler> [1. Vorhaltezeit] [Vorhaltezeit] [1.
Seite 17
R911172803 | PST 6xxx.321 Bosch Rexroth AG 17/48 Ablaufdiagramme *2: möglicher Bereich zur Ablaufunterbrechung durch R ücknahme Start Selbsthaltung <Start_1> <Programmanwahl> <Externe Zündung ein> <Fehler rücksetzen> Fehler rücksetzen mit FK <Fehler rücksetz. m. Ablaufwiederholung> <Analoger Druck Ausgang> <Fortschaltkontakt FK> (Start/Dauer vor Ende NHZ programmierbar) min.
Seite 18
18/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Ablaufdiagramme *1 Die Zeit zwischen Vorhaltezeit und Nachhaltezeit entspricht der Gesamtzeit von 1. Stromzeit, 1. Pausenzeit, 2. Stromzeit, 3. Pausenzeit und 3. Stromzeit. Der Ablauf erfolgt ohne Schweißstrom. <Start_1> <Programmanwahl> <Externe Zündung ein>...
Seite 19
R911172803 | PST 6xxx.321 Bosch Rexroth AG 19/48 Ablaufdiagramme t>0 abschalten kein Start = keine OHZ <Start_1> <Programmanwahl> <Externe Zündung ein> <Fehler rücksetzen> Fehler rücksetzen mit FK Eingang Bit 5 <Fehler rücksetzen mit Ablaufwiederholung> <Analoger Druck Ausgang> <Fortschaltkontakt FK> (Start/Dauer vor Ende NHZ programmierbar) <Schweißfehler>...
Seite 20
20/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Ablaufdiagramme <Start_1> <Programmanwahl> <Externe Zündung ein> <Fehler rücksetzen> Fehler rücksetzen mit FK Eingang Bit 5 <Fehler rücksetzen mit Ablaufwiederholung> <Analoger Druck Ausgang> <Fortschaltkontakt FK> (Start/Dauer vor Ende NHZ programmierbar) <Schweißfehler> [1. Vorhaltezeit] [Vorhaltezeit] [1.
Seite 21
R911172803 | PST 6xxx.321 Bosch Rexroth AG 21/48 Ablaufdiagramme *1 mögliche Abbruchzeit Ablauf *2 Haltezeit Ablauf <Start_1> Abbruchzeit/Haltezeit <Programmanwahl> <Externe Zündung ein> <Fehler rücksetzen> Fehler rücksetzen mit FK Eingang Bit 5 <Fehler rücksetzen mit Ablaufwiederholung> <Analoger Druck Ausgang> <Fortschaltkontakt FK>...
Seite 22
22/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Ablaufdiagramme Abb. 11: Beispiel Ablaufabbruch während der Vorhaltezeiten (1.VHZ, VHZ) vor Selbsthaltung...
Seite 23
R911172803 | PST 6xxx.321 Bosch Rexroth AG 23/48 Ablaufdiagramme ohne Bedeutung frühester neuer Start, neue Programmanwahl <Start_1> t > 0 <Programmanwahl> <Externe Zündung ein> <Fehler rücksetzen> Fehler rücksetzen mit FK Eingang Bit 5 <Fehler rücksetzen mit Ablaufwiederholung> <Analoger Druck Ausgang>...
Seite 24
24/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Ablaufdiagramme...
Seite 25
R911172803 | PST 6xxx.321 Bosch Rexroth AG 25/48 Contents Contents To this Documentation................27 Validity of the documentation ............27 Required and supplementary documentation........27 Display of information............... 28 1.3.1 Safety instructions ............28 ...
Seite 26
26/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Contents...
R911172803 | PST 6xxx.321 Bosch Rexroth AG 27/48 To this Documentation To this Documentation Validity of the documentation This documentation applies to the Instruction manual Rexroth PST6xx0 Weld timer with Thyristor power unit. The content belong to Connection (power supply) ...
28/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 To this Documentation Display of information In order to enable you to work with your product in a fast and safe way, uniform Safety instructions, symbols, terms and abbreviations are used. For a better understanding they are explained in the following sections.
R911172803 | PST 6xxx.321 Bosch Rexroth AG 29/48 Safety instructions Safety instructions The Safety instructions please look in Tab. 1: Required and supplementary documentation Rexroth PST6xx0 Weld timer with Thyristor power unit Instruction Manual. General notes for property damages and product damages General notes for property damages and product damages please look in Tab.
Seite 31
R911172803 | PST 6xxx.321 Bosch Rexroth AG 31/48 Connection diagram /DO1 /DI1 5VDC /DO2 /DI2 RBST Free Free Free E 02 Free E 03 Free E 04 Free E 05 Free E 06 Free E 07 Free A 00 Free...
Seite 32
32/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Connection diagram Fig. 3: Connection diagram examples...
Seite 33
R911172803 | PST 6xxx.321 Bosch Rexroth AG 33/48 Connection diagram Fig. 4: Mains connection...
34/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Input/Output array Input/Output array Discrete 24 V input/output field Discrete inputs Tab. 4: Bits Inputs E 00 Not used E 01 Not used E 02 Not used E 03 Not used E 04...
R911172803 | PST 6xxx.321 Bosch Rexroth AG 35/48 Input/Output array Bits Inputs (control word) Program selection "4" Program selection "8" Program selection "16" Program selection "32" Program selection "64" Program selection "128" Serial output field Tab. 7: Bits Outputs (status word)
36/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Features Features Sequence: Standard 50/60 Hz (sequence parameter in net periods) I/O-board: PS5 IBS (For details, see Tab. 1: Required and supplementary documentation Rexroth PST6xx0 Weld timer with Thyristor power unit Instruction Manual)
38/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Timer diagrams Timer diagrams Fig. 5: Example of normal schedule, single spot...
Seite 39
R911172803 | PST 6xxx.321 Bosch Rexroth AG 39/48 Timer diagrams Fig. 6: Example of possible range for sequence interruption, single spot...
Seite 40
40/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Timer diagrams Fig. 7: Example of no weld schedule, single spot...
Seite 41
R911172803 | PST 6xxx.321 Bosch Rexroth AG 41/48 Timer diagrams Fig. 8: Example of normal schedule, repeat mode...
Seite 42
42/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Timer diagrams Fig. 9: Example of normal schedule, seam...
Seite 43
R911172803 | PST 6xxx.321 Bosch Rexroth AG 43/48 Timer diagrams Fig. 10: Example of possible termination time/hold time between program selection and start...
Seite 44
44/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Timer diagrams Fig. 11: Example of sequence cancellation during squeeze time (1.SQZ, SQZ) before latching...
Seite 45
R911172803 | PST 6xxx.321 Bosch Rexroth AG 45/48 Timer diagrams Fig. 12: Example of sequence interruption during latching...
Seite 46
46/48 Bosch Rexroth AG R911172803 | PST 6xxx.321 Timer diagrams Notes:...
Seite 47
R911172803 | PST 6xxx.321 Bosch Rexroth AG 47/48 Timer diagrams Notes:...
Seite 48
Bosch Rexroth AG Electric Drives and Controls P.O. Box 13 57 97803 Lohr, Germany Bgm.-Dr.-Nebel-Str. 2 97816 Lohr, Germany Tel. +49 9352 18 0 +49 9352 18 8400 www.boschrexroth.com/electrics R911172803 DOK-PS6000-PST6XXX.321-IT04-D0-P...