Inhaltszusammenfassung für Bosch Rexroth PST 6 144 Serie
Seite 1
Electric Drives Linear Motion and and Controls Hydraulics Assembly Technologies Pneumatics Service Rexroth PST 6xxx.144 1070087008 Edition 04 Schweißsteuerung mit Thyristor-Leistungsteil Weld Timer with Thyristor Power Unit Typspezifi sche Anleitung | Type-Specifi c Instructions...
Seite 2
Eigenschaften. Die Angaben entbinden den Verwender nicht von eigenen Beurteilungen und Prüfungen. Unsere Produkte unterliegen einem natürlichen Verschleiß- und Alterungsprozess. Alle Rechte bei Bosch Rexroth AG, auch für den Fall von Schutzrechtsanmeldungen. Jede Verfügungsbefugnis, wie Kopier- und Weitergaberecht, bei uns.
1070087008 | PST 6xxx.144 Bosch Rexroth AG 5/44 Zu dieser Dokumentation Zu dieser Dokumentation Gültigkeit der Dokumentation Diese Dokumentation gilt als Ergänzung für die Anleitung Rexroth PST 6xx0 Schweißsteuerung mit Thyristor-Leistungsteil. Der Inhalt bezieht sich auf • den Anschluss (Netzversorgung) •...
6/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Zu dieser Dokumentation Darstellung von Informationen Damit Sie mit dieser Dokumentation schnell und sicher mit Ihrem Produkt arbeiten können, werden einheitliche Sicherheitshinweise, Symbole, Begriffe und Abkürzungen verwendet. Zum besseren Verständnis sind diese in den folgenden Abschnitten erklärt.
1070087008 | PST 6xxx.144 Bosch Rexroth AG 7/44 Sicherheitshinweise Sicherheitshinweise Dieses Kapitel enthält wichtige Informationen zum sicheren Umgang mit dem beschriebenen Produkt. Die Sicherheitshinweise sehen Sie bitte unter Tab. 1: Erforderliche und ergänzende Dokumentationen Rexroth PST 6xx0 Schweißsteuerung mit Thyristor-Leistungsteil nach.
8/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Anschlussplan Anschlussplan +24V E/A Stoppkreis: 0V E/A Netz potentialfreier Kontakt (siehe max. 24V=/3A Tabelle) +24V intern erzeugt +24V extern Eigenversorgung, 0V extern für E/A- 0V intern erzeugt Versorgung über Stoppkreis +24V Standby und für Logik...
Seite 9
1070087008 | PST 6xxx.144 Bosch Rexroth AG 9/44 Anschlussplan Start 1 E 00 Programmanwahl Zange1/Bit2 E 01 Programmanwahl Zange2/Bit2 E 02 Programmanwahl Zange1/Bit1 E 03 Programmanwahl Zange2/Bit1 E 04 Programmanwahl Bit3 E 05 Frei E 06 Temperatur extern 2 E 07...
Seite 10
10/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Anschlussplan Reserviert E 00 Klemmen / Ablauf E 01 Zündung ein, extern E 02 Frei E 03 Frei E 04 Frei E 05 Frei E 06 Frei E 07 Frei E 08...
Seite 11
1070087008 | PST 6xxx.144 Bosch Rexroth AG 11/44 Anschlussplan +24V E/A Stoppkreis: 0V E/A potentialfreier Kontakt Stopp Belastung 24V=/3A +24V Interne +24V extern Spannungs E/A-Feld Versorgung 0V extern - erzeugung über Stoppkreis Logik Versorgung von +24V Standby +24V Interne extern...
Seite 12
12/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Anschlussplan PST 6100 L / W PST 6250 L / W Netz Netz 400VAC - 400VAC - 600VAC 600VAC max. 50 mm max. 95 mm Schweiß- Schweiß- Transformator Transformator max. 50 mm max.
1070087008 | PST 6xxx.144 Bosch Rexroth AG 13/44 Ein/Ausgangsfeld Ein/Ausgangsfeld Diskretes Ein-/Ausgangsfeld 6.1.1 Diskretes 24 V Ein-/Ausgangsfeld (PS5 EA Disk2R) Diskrete Eingänge Tabelle 4: Bits Eingänge: E 00 Start 1 E 01 Programmanwahl Zange1/Bit2 E 02 Programmanwahl Zange2/Bit2 E 03...
Seite 14
14/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Ein/Ausgangsfeld Diskrete Ausgänge Tabelle 5: Bits Ausgänge: A 00 Magnetventil 1 A 01 Ablaufende 1 A 02 Bereit Steuerteil A 03 Fehler Steuerteil A 04 Schweißfehler A 05 Fräsanfrage 1 A 06 Fräsanfrage 2...
1070087008 | PST 6xxx.144 Bosch Rexroth AG 15/44 Ein/Ausgangsfeld 6.1.2 Diskretes 24 V Ein-/Ausgangsfeld (PS5 EA Disk4R) Diskrete Eingänge Tabelle 6: Bits Eingänge: E 00 Reserviert E 01 Klemmen / Ablauf E 02 Zündung ein, extern E 03 Frei E 04...
1070087008 | PST 6xxx.144 Bosch Rexroth AG 19/44 Merkmale 7.1.4 Ablaufende Es existieren zwei Ausgänge „Ablaufende“: • „Ablaufende 1“ ist den Programmen 1 bis 3 zugeordnet, • „Ablaufende 2“ den Programmen 5 bis 7. Am Ende der Nachhaltezeit wird nach einem fehlerfreien Ablauf der jeweilige Ausgang Ablaufende gesetzt.
22/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Ablaufdiagramme Ablaufdiagramme Bei diesem Typ sind keine allgemeinen Ablaufdiagramme vorhanden.
Seite 23
1070087008 | PST 6xxx.144 Bosch Rexroth AG 23/44 Contents Contents To this Documentation ................25 Validity of the documentation ............25 Required and supplementary documentation ........25 Display of information ............... 25 1.3.1 Safety instructions ............25 1.3.2 Symbols ................25 1.3.3...
Seite 24
24/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Contents...
1070087008 | PST 6xxx.144 Bosch Rexroth AG 25/44 To this Documentation To this Documentation Validity of the documentation This documentation applies to the Instruction manual Rexroth PST6xx0 Weld timer with Thyristor power unit. The content belong to • Connection (power supply) •...
26/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 To this Documentation Meaning of the Symbols Tab. 2: Symbol Meaning If this information is disregarded, the product cannot be used and or operated to the optimum extent. Single, independent step ...
1070087008 | PST 6xxx.144 Bosch Rexroth AG 27/44 Safety instructions Safety instructions The Safety instructions please look in Tab. 1: Required and supplementary documentation Rexroth PST6xx0 Weld timer with Thyristor power unit. General notes for property damages and product damages General notes for property damages and product damages please look in Tab.
Seite 29
1070087008 | PST 6xxx.144 Bosch Rexroth AG 29/44 Connection diagram Start 1 E 00 Program select gun 1 / Bit2 E 01 Program select gun 2 / Bit2 E 02 Program select gun 1 / Bit1 E 03 Program select gun 2 / Bit1...
Seite 30
30/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Connection diagram Reserved E 00 Gun closed / Sequence E 01 External weld on E 02 Not used E 03 Not used E 04 Not used E 05 Not used E 06...
Seite 32
32/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Connection diagram PST 6100 L / W PST 6250 L / W Mains Mains 400VAC - 400VAC - 600VAC 600VAC max. 50 mm max. 95 mm Welding Welding Transformer Transformer max. 50 mm max.
1070087008 | PST 6xxx.144 Bosch Rexroth AG 33/44 Input/Output array Input/Output array Discrete input/output field 6.1.1 Discrete input/output field (PS5 EA Disk2R) Discrete inputs Tab. 4: Bits Inputs E 00 Start 1 E 01 Program select gun 1 / Bit2...
Seite 34
34/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Input/Output array Discrete outputs Tab. 5: Bits Outputs A 00 Solenoid Valve 1 A 01 End of Sequence (EOS) 1 A 02 Weld Timer Control Ready A 03 Weld Timer Control Fault...
1070087008 | PST 6xxx.144 Bosch Rexroth AG 35/44 Input/Output array 6.1.2 Discrete input/output field (PS5 EA Disk4R) Discrete inputs Tab. 6: Bits Inputs E 00 Reserved E 01 Gun close / Sequence E 02 External Weld on E 03 Not used...
1070087008 | PST 6xxx.144 Bosch Rexroth AG 37/44 Features Features Schedule Standard 50 / 60 Hz I/O Module : PS5 EA Disk2R PS5 EA Disk4R (Details refer to Tab1. Required and supplementary documentation, Instruction Manual Rexroth PST6xx0 Weld timer with Thyristor power unit).
38/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Features 7.1.1 Program choice: (X13) Start 1 Start 2 P1/2 P1/1 P2/2 P2/1 Program Remark Fault message „95“ Reserved program Tip Dress program gun Fault message „95“ Reserved program Tip Dress program gun 7.1.2...
1070087008 | PST 6xxx.144 Bosch Rexroth AG 39/44 Features 7.1.5 Sequence mode The modes of the sequence are determined by two inputs: Input X23/E01 "Gun close / Sequence" and X23/E02 "External Weld on". Therefore we have 4 combinations: Gun close /...
40/44 Bosch Rexroth AG 1070087008 | PST 6xxx.144 Features Appendix: Diagnosis code for 7-display Display Display Display Display Display Display Display Display Code Message II / 10 II / 20 II / 40 II / 80 I / 1 I / 2...