Bosch Rexroth PST 6 Serie Betriebsanleitung Seite 195

1070080029 / 05 | PST 6xx0
General information on damage to property and products
Overheating or condensation due to insufficient cooling
Possibility of temporary interruption of the welding process, a re­
duced useful life of the product, destruction of the device, damage
to the electrical equipment, unexpected plant reactions!
Make sure that the conditions for sufficient cooling set forth in the
"
technical data are met.
Make sure that air-cooled devices are equipped with forced coo­
"
ling. Cooling by means of convection is not sufficient!
" Make sure that no condensation forms on water-conducting
components.
If that is not possible, a sufficient discharge and protection against
condensation must be provided.
Use air conditioning systems, if required.
Electric Drives | Bosch Rexroth AG
and Controls
NOTICE
195 / 330