Figure 1: before changing
NOTICE! Adjust the door properly. The seal must close properly.
3.3 Installation of the decor-frame
1. Place the décor-panel (1) against the surface of the door of the appliance (2).
Take the bottom-part (3) of the décor-frame to clasp the bottom of the décor-
panel (1) with the four screws (4).
2. Now take the top-part (5) of the décor-frame to clasp the top of the décor-
panel (1) with four screws (6).
3. Now take the left part (7) of the décor-frame to clasp the left side of the décor-
panel (1) with two screws (8).
4. Now take the right part (9) of the décor-frame to clasp the right side of the
décor-panel (1) with two screws (10).
Figure 2: after changing
38