Temperature Control; Operation Parameters - Pkm KS 82.3A+ UB Bedienungsanleitung

4.2 Temperature control

1. The thermostat controls the temperature inside your appliance. The thermostat
is switched off when it is set to position 0/AUS/OFF.
2. Turn the knob to position 3 (normal operating-temperature) as soon as you have
switched on the appliance. After approx. 5 hours the appliance has reached its
normal operating-temperature. Your new appliance is ready to operate now.
3. If you want to set a warmer temperature, turn the knob from position 3 to
position 2 or lower.
4. In case of high ambient temperatures (e.g. hot summer days): turn the knob from
position 3 to position 4 or higher to set a lower temperature.
5. If you choose a low temperature and some rime is generated at the backside of
the appliance, we recommend to choose a higher temperature.
6. When you open the door of the cooling-compartment, the internal light is
switched on. When you close the door, the internal light is switched off.
➢ If you have disconnected the appliance from the energy supply, wait 3-5 minutes
before you restart the appliance. Otherwise the appliance can be damaged.
➢ The setting 0/OFF switches off the compressor only. You must unplug the
appliance to disconnect it from the mains.

4.3 Operation parameters

1. The appliance can only reach the relevant temperatures when:
a. the ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
e. the appliance is properly positioned.
f. you have not overfilled the appliance.
g. you do not store warm or hot food in the appliance.
2. When the ambient temperature is very high, it is recommended to set the
thermostat to a colder setting if needed. If the colder setting should cause strong
formation of encrusted ice, please select a lower setting.
40