Heating And Keeping Liquids Warm - Silvercrest SEAD 1800 A1 Bedienungsanleitung

6) Using the control dial "Minutes" 3, set the cooking time specified in the table.
7) Start the appliance by pressing the heating START/STOP 9 button. Signal
tones sound and the heating begins. Once the heating up is complete, signal
tones sound, "
indicator "Minutes" 5 begins to count down. As soon as the set time period
has expired, signal tones sound. The appliance switches itself off. "
"
8) Position a heat resistent container under the pouring tap 0 and press the
pouring lever q down. The water drains itself.
9) When the water has drained away allow the preserving jars to cool down.

Heating and keeping liquids warm

WARNING! PROPERTY DAMAGE!
► Fill it with liquids to NO FURTHER that the MAX level marking! Otherwise,
the liquid could overflow!
1) Pour the liquid (for example, mulled wine or cocoa) into the preserving boiler.
2) Place the lid 1 onto the preserving boiler.
WARNING! RISK OF INJURY!
► When it is hot, take hold of the appliance ONLY by means of the heat
insulated handles 2. Risk of Burns!
3) Using the control dial "Temperature" 9, set the desired temperature.
4) Press the button TIMER 3. "
necessary to set a cooking time. The appliance heats up continuously until it
is switched off.
5) Regularly stir the liquid so that the heat is evenly distributed.
6) When the desired temperature has been reached, signal tones will sound.
You can drain off liquids without solid particles through the tap 0.
WARNING! PROPERTY DAMAGE!
► Do not pour off liquids with solid constituents, for example, soups.
The solids will block the pouring tap 0!
1) To do so, hold a cup or similar under the tap 0 and press the dispensing
lever q downwards.
2) When the desired amount of liquid is in the cup, release the dispensing lever q.
The pouring tap 0 is now closed.
NOTICE
► You can also keep stews warm in the preserving boiler. They do however
need to be stirred regularly to prevent them sticking to the bottom of the
appliance.
SEAD 1800 A1
" appears in the display and the time set in the display
" extinguish in the display.
" appears in the display. It now not
" and
GB │ IE │
13 ■