Instructions For Use - HBM U2B Serie Montageanleitung

7
U2B
1

Instructions for use

The U2B series of force transducers is suitable for measuring tensile forces
and pressures. They measure static and dynamic forces with great accuracy
and therefore require careful handling. Transport and installation of the devi
ces require special attention for the same reason. Transducers can be
permanently damaged if knocked or dropped.
These force transducers are manufactured from stainless steel and are suita
ble for use under harsh environmental conditions and severe operating
constraints. They are maintenance free and can even be installed in places
that are hard to reach. Their measuring signals can be transmitted to remote
measuring equipment.
The perfect seal that protects the sensitive strain gauge applications has to be
maintained by the housing in all conditions. The base of the housing must the
refore be treated with special care, since it is very thin.
The permitted limits for mechanical, thermal and electrical loadings are given
in the Technical Data. Please take these points into account whenever
planning for measurement arrangements and when installing or operating the
equipment.
A0382 3.3 en/de/fr HBM