Scope Of Supply; General Application Instructions - Hbm U9B Montageanleitung

8
1

Scope of supply

• 1 Force transducer U9B
• 1 Mounting instructions
• 1 Manufacturing certificate
2

General application instructions

The U9B type series force transducers are suitable for measuring tensile and
compressive forces. Because they provide highly accurate static and dynamic
force measurements, they must be handled very carefully. Particular care
must be taken when transporting and installing the devices. Dropping or
knocking the transducers may cause permanent damage.
The relatively thin housing covers must not be damaged, particularly at nomi­
nal (rated) forces up to 200 N, otherwise the transducer will become useless,
see section 3.2 on Page 9.
The specifications list the permissible limits for mechanical, thermal and elec­
trical stress. It is essential that these are taken into account when planning the
measuring set‐up, during installation and ultimately, during operation.
HBM
U9B
A0137-7.0 en/de/fr