Activating / Deactivating Automatic Operation - Sentiotec CV 4 Gebrauchsanweisung

Operating instructions for the user - Figure 8
6 Continued
5 Setting the temperature [15 - 110° C]
1. Use the UP / DOWN buttons 7 to scroll to TEMP.
2. Press OK 6.
The display 5 indicates, e.g.:
SAUNA
Temp
or the value set previously.
3. Use the UP / DOWN buttons 7 to enter the desi-
red value, e.g. [95° C:].
4. Press OK 6.
The display 5 indicates:
SAUNA
Temp
After approx. 1 second you will see:
SAUNA
Temp
The desired temperature (95° C) has been set.
6 Setting the fan [0 - 100%]
0 = off / 100 = max.
NOTE - If a fan was not installed:
Select 0% = OFF.
1. Use the UP / DOWN buttons 7 to scroll to FAN.
2. Press OK 6.
The display 5 indicates, e.g.:
SAUNA
fan
or the value set previously.
3. Use the UP / DOWN buttons 7 to enter the desi-
red value; e.g. [80%].
4. Press OK 6.
The display 5 indicates:
SAUNA
fan
The fan speed has been set.
7
Automatic operation can be activated after program-
ming.
SET
After automatic operation has lapsed, it will have to
be activated again for a new sauna bath.
90° C
SEND
95° C
Activating automatic operation:
1. Use the UP / DOWN buttons 7 to scroll
OFF
current temperature
2. Press OK 6.
Automatic operation has been activated. The system
starts to heat at the set time.
Deactivating automatic operation
SET
60%
1. Use the UP / DOWN buttons 7 to scroll
2. Press OK 6.
OFF
OFF
Automatic operation has been deactivated.
Activating / Deactivating
automatic operation
NOTE:
WARNING - Fire hazard:
Prior to turning on the sauna control and
when setting the automatic operation (sys-
tem turns on automatically after a fixed time)
make sure that no combustible objects have
been placed on top of the stove.
to AUTOMATIC.
The display 5 indicates:
SAUNA SEND
Automatic ON
After approx. 1 second you will see:
SAUNA AUTO
Start Time 18:30
to AUTOMATIC.
The display 5 indicates:
SAUNA SEND
Automatic OFF
After approx. 1 second you will see:
SAUNA OFF
Automatic OFF
37