Medtronic Percept PC B35200 Implantationsanleitung Seite 12

Figure 1. Retracting the setscrews in the self-sealing grommet.
① Torque wrench
1. Retract each setscrew, if necessary, by inserting the white torque wrench fully into the
self-sealing grommet of the connector block. Rotate the torque wrench
counterclockwise, keeping the setscrew within the connector block (Figure 1).
2. If using 2 leads, identify the left and right extensions. If necessary, tug gently on either
extension and view its movement at the lead site to identify the left and right
extensions.
12 English B35200 2020-01-01
② Self-sealing grommets