Introduction; Intended Use; Features; Package Contents - Parkside PASSK 20-Li A1 Originalbetriebsanleitung

CORDLESS VEHICLE IMPACT
WRENCH PASSK 20-Li A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is intended for screwing in and
unscrewing screws as well as for tightening and
loosening nuts. The appliance has a clockwise/
anticlockwise rotation, a 1/2" external square
drive bit holder and an LED working light. The light
on this appliance is intended to illuminate the
immediate working area of the appliance. The
rotary impact function of the appliance enables the
power of the motor to be converted into uniform
rotary impacts. The impact mechanism comes into
effect during tightening and loosening.
The appliance is designed for use by adults. Young
people under 16 years of age may only use the
appliance under supervision. The manufacturer
accepts no liability for damages caused by
improper use or incorrect operation of the appli-
ance.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
│ GB │ IE
■ 16

Features

Tool holder
Rotation direction switch/lock
Belt clip
Battery charge level button
Battery display LED
Battery pack*
Release button for the battery pack
LED work light
Torque preselection button
ON/OFF switch / speed control
Sockets (17/19/21/23 mm)
High-speed charger*
Red charge control LED
Green charge control LED

Package contents

1 cordless vehicle impact wrench
PASSK 20-Li A1
4 sockets (17/19/21/23 mm)
1 belt clip
1 carrying case
1 set of operating instructions

Technical data

Cordless vehicle impact wrench
PASSK 20-Li A1
Rated voltage
Idle speed
Rated stroke rate
Max. torque
Torque selectable at 5 levels
Tool holder
20 V (DC)
0–2300 rpm
0–3000 rpm
400 Nm
100/150/200/
300/400 Nm
1/2"
PASSK 20-Li A1