RDE 92 750-01-R/03.03 | A10VG
Überprüfungshinweise
Inspection notes
1
1
Mobile Hydraulics | Bosch Rexroth AG
Alle Lager erneuern.
Replace all bearings.
Kontrolle!
1. Verzahnung, ausgeschlagen, Passungsrost.
2. Lauffläche.
3. Einlaufrillen vom Wellendichtring.
Check!
1. Splines, wear steps, corrosion.
2. Running surfaces.
3. Grooves made by the shaft seal.
Stellkolbenlaufbüchse (1) riefenfrei, nicht
ausgelaufen.
Check that the control piston guide bush (1)
is free of grooves and is free of wear.
Kontrolle!
Stellkolben (1) riefenfrei.
Check!
Control piston (1) is not scored.
29