gefran 600 Bedienungsanleitung Seite 21

P.V. / S.V.
sp
-
SP. 1
SP. 2
in. 2
al. 1
al. 2
al. 3
a. x b
0V. P
(*) The automatic return PV/SV display is disabled for these displays
If Inc, Dec, F keys are not pressed within 15 sec, display returns
OUTPUT 2
0 = None
1 = Relay
2 = Logic
3 = Triac
Example:
Downloaded from www.Manualslib.com
6 • PROGRAMMING and CONFIGURATION
LEVEL 1 MENU
P.V. / S.V.
Process variable (PV display)
Work Setpoint (SV display) or control
output value with controller in manual
Local Setpoint
Setpoint 1
Setpoint 2
Ammeter input value
(*)
(with CT input present)
Alarm point 1 (scale points)
Alarm point 2 (scale points)
Alarm point 3 (scale points)
Heater break alarm point
scale points of ammeter input)
Control output value
(*)
(+Heat / -Cool)
automatically to P.V. value.
N.B.:
Once a particular configuration is entered, all unnecessary parameters are no longer displayed
INPUT /OUTPUT 3 SERIAL COMMUNICATION / OUT4
0 = None 0 = None
1 = Relay 1 = RS 485
2 = Logic 2 = Relay
3 = Continuous
4 = Analog
5 = In TA
6 = In digital
1 1 1 = R + R + RS 485
manuals search engine
INF
NO
S4 Jumper
(CPU) = ON
CFG
SEr
InP
Out
PAS
NO
PAS = 99
Pro
Hrd
Lin
U.CA
• InFo Display
INF
upd
(od
err
(. x d
21
Information display
Custom menu
Serial communication
Input settings
Output settings
Keep the F key
pressed to scroll
the menus
Password Release the F key
to select the
displayed menu
Press the F key to
access the
parameters
Keep the F key
Protection code
pressed to exit any
Keep F + Auto/Man
Hardware configuration
keys pressed for 2
sec. on any menu
to go immediately
to level 1 display
Input linearization
Pressing the
Auto/Man + F keys
on any menu
User calibration immediately returns
you to the previous
parameter.
Information
display
Software
version
Instrument
code
0 No Error
Self diagnostic
1 Lo
error code
2 Hi
3 ERR
4 SBR
+8 error OUT2 card recognition
+16 error OUT3 card recognition
Configuration
hrd
menu