Maintenance - RIB Ecopesi S Montageanleitung

I
NTERNAL - EXTERNAL EMERGENCY RELEASE
ECOPESI S is supplied with a release lever operated from inside the
home (Fig. 20).
In the event of power failure, turn the lever counter-clockwise to release
the operator. Once released, manually manoeuvre the up-and-over
door.
If you require an emergency disengagement facility also outside the
building, order the optional special lockset with knob to mount to the door
(code ACZ9010).
If the door is already equipped with a lockset, order the arc (code
ACG8195) and screw it to the door as shown in the pictures (Fig. 21-a-
b-c).
To safely carry out the manual movement of the door you need verify
that:
- The door is equipped with suitable handles;
- Such handles do not create dangerous points during their utilization;
- The manual effort to move the door must not exceed 225N for the doors
placed on private sites and 390N for the doors placed on commercial
and industrial ones (values indicated in point 5.3.5 of EN 12453
standard).
ATTENTION: The activation of the release can cause an incontrollable
movement of the door in case the latter is not correctly
balanced.
M
AINTENANCE
To be undertaken only by specialized staff after disconnecting
power supply.
Grease the fulcrums, the counterweight channels and the telescopic
levers once a year.
code ACZ9010
code ACG8195
23
23
G
B
20
21-a
21-b
21-c