Labels Placement - Corghi A 2030 Betriebsanleitung

22. Before starting the machine, the operator must pay close attention to the warnings
of the adhesive labels affixed to the equipment.
23. Disconnecting the pneumatic supply, both due to non-use or to maintenance of the
machine or the pneumatic system of the workshop, can leave
pneumatic actuators under pressure. Discharge the machine
pneumatic system using the controls on the actuators.
24. Use a lifting device if the wheel weighs more than 10 kg, with a
lifting frequency of more than 20 wheels/hour.
1.2.b. LABELS PLACEMENT
No. Part Number
1 4-103881
2 461236
3 446429
4 446442
5 4-113355
6 446598
7 418135
A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator's manual
Drawing Description
LABEL, CORGHI LOGO
FRONT
LABEL, CORGHI LOGO
LATERAL
LABEL, OPERATING PRESSURE
LABEL, DANGER - PRESSURISED
CONTAINER
LABEL, FILTER
LABEL, SWITCH OFF THE
POWER
LABEL, ROTATION DIRECTION
EN
81