Special Tools; Approved Uhp And Run Flat Tyre Demounting And Mounting Procedure - Corghi A 2030 Betriebsanleitung

- Press the pedal
- release the wheel and remove it from the tyre changer.

Special tools

To make it easier to mount/demount low profile tyres, it is advised to use the bead pressing
clamp (optional accessory supplied on request).
8.7 APPROVED UHP AND RUN FLAT TYRE DEMOUNTING AND
MOUNTING PROCEDURE
For a detailed description of the UHP and RUN FLAT tyre demounting/mounting procedure,
please refer to the instructions in the manual developed by WDK (German Tyre Industry
Association).
A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator's manual
114
28
to move the column into the "non-working position".
- Once you have mounted the first bead,
repeat the same steps for the second bead
(fig.29).
29