Wheel Positioning (Only A224) - Corghi A 2030 Betriebsanleitung

8.5.b WHEEL POSITIONING (only A224)
- Move the mounting/demounting tool head against the rim edge (fig.23a).
- Press button
Important: press button
while the mounting/demounting tool head goes slightly upwards moving away from the
rim edge (fig. 23).
The space between the rim and the tool head will be maintained for as long as the
handle is in the locking position.
The operator can tilt the pole freely (e.g. when demounting wheels of the same size)
without repositioning the tool head.
- Insert and position the bead lifting lever on the mounting tool head (fig.24).
When working with alloy rims or rims with delicate paintwork, you are advised to remove
the bead lifting tool before proceeding with the demounting.
Grip the bead lifting tool firmly during use.
A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator's manual
to lock the tool head into the working position (fig. 23b).
to lock both the vertical and horizontal arms simultaneously
CAUTION
23a
23b
EN
24
111