Set Clock - Iberital Expression Pro Installations- Und Betriebshandbuch

IBERITAL
- OFF position:
- When the display is in the OFF position, it will show OFF and the time. In order to access the OFF
mode, press the I/O button.
- ON position:
- Press the I/O button and the display will show the boiler temperature in ºC, the time and the
name entered.
User MENU display: When the coffee machine switch is in position 2 and the display in the ON position (on the screen
the name entered will be shown), press the MENU for at least 5 seconds, and enter the user level programming mode.
Technical MENU display: When the coffee machine switch is in position 2 and the display in the OFF position (on the
screen the word OFF will be shown), press the MENU for at least 10 seconds, and enter the technical level programming
mode.
IMPORTANT
Once inside the MENU, pressing on the MENU allows you to move through the display functions.
Pressing the OK will confirm the chosen function and confirm the changes.
To change between two functions, the UP button moves you up an option, and the DOWN will drop you down an option.
(See image in sections 2.9.1.)
2.9.3.1.1. User menu display
- Programming the TIME and weekly ON/OFF for the machine:
When the words SET CLOCK appear, confirm the selection by pressing the OK button. The
programming of the time and day of the week is very important, because this information will be
used by the control unit for the weekly ON/OFF activation of the machine.
Press the UP/DOWN buttons to change the HOURS and press OK to confirm and move on to the
MINUTES and the day of the week. After confirming the day of the week, it will automatically go
into the weekly ON/OFF programming mode.
84
OFF hh:mm
xxxºC hh:mm

Set clock

HH.MM.xxxxxxxxx
HH: Hours
mm: Minutes
xxxxxxx: Day of the week
INSTALLATION AND OPERATION MANUAL