Iberital Expression Pro Installations- Und Betriebshandbuch Seite 101

- COUNTERS: Through this menu we can see all the counters.
Group 1
0
Group 2
0 0
1
Group 3
Others
1 espresso:
1 coffee:
Group X
2 espressos:
quantities:
2 coffees:
Continuous:
Total erogated coffees:
Other
Hot water:
Number of cycles:
counters:
Consumed water (l):
Partial counters
reset completed.
IMPORTANT
The partial counters are all those relating to the making of coffee, and hot water for infusions.
To erase them, press the buttons for "2 coffees and 2 espressos" for GROUP 1 (on the left)
simultaneously, when in any counter menu screen. (The number of cycles and water consumed will
be reset by the technician after the service resets and/or filter regeneration).
- AUTO-WASH: Through this menu we can see the service counters.
Group 1
Group 2
Group 3
All
Is the cleaning filter
with detergent
put in Group X?
The temperature in
boiler is less than
70ºC (158ºF).
¿Continue anyway?
GR. 1
GR. 2
GR. 3
Please remove the cleaning filter.
2.9.3.2.2. Technical menu display
Display config.
INSTALLATION AND OPERATION MANUAL
By pressing the
to see the counters.
00000
00000
00000
00000
00000
00000
00000
00000/00000
00000/00000
By pressing the
order to perform an individual or collective auto-wash.
Auto wash in process.
Please wait.
Finished.
GR. 1
GR. 2
GR. 3
Machine & Boiler
Doses Config.
Config.
icon, we can select the group for which we wish
Once a group is selected, we will see all the count values for the
group, by service type.
If we select the "Other" value, we can see all the general counters.
This screen shows us that we have reset the partial counters
on our machine.
icon we can select a group, or all of them, in
With the group or groups selected, we need to confirm the auto-
wash, having previously fitted the blind filters.
When the temperature is insufficient, we will be informed via
a message. We can continue, or go back and perform this
function, having increased the system temperature.
Auto-wash in progress notification message.
Once the process is complete, change the filter
basket(s), and press
Alarms Config.
IBERITAL
to quit.
Cancel o Go Back
99