Selecting A Program Category; Selecting A Program; Personalising A Program - Compex VITALITY Gebrauchs- Und Anwendungshandbuch

2a 2b 2c
2d
Fig. 2
2a To select the language of your choice, press
the "+"/"–" key of channel 1 (to go up or down),
until the desired language is displayed in white
characters on a black background.
2b To set the contrast of the display, press the
"+"/"–" key of channel 2 ("+" to increase the
preferred percentage and "–" to reduce it).
2c To set the sound volume, press the "+"/"–" of
channel 3 ("+" to increase the preferred percen-
tage and "–" to reduce it).
To confirm the parameters selected, press
2d
the "On/Off" switch. Your stimulator saves your
options. It is now ready for use with the settings
you selected.

3. Selecting a program

category
o switch on your stimulator, briefly
T
press the "On/Off" switch on the left
of the Compex. A musical signal can
be heard and a screen showing the
different program categories is
displayed.
efore choosing a program, you
B
should select the desired category.
3a
3c
Fig. 3
3a To select the desired category, press the
"+"/"–" key of channel 1 (to go to the left) or
channel 3 (to go to the right), until the desired
category is displayed in a frame.
12
Downloaded from www.Manualslib.com
3b To confirm your choice and to move on to
the program selection screen (see the next
section: "Selecting a program"), press the
"+"/"–" key of channel 4.
3c Press the "On/Off" key to switch off the
stimulator.
4. Selecting a program
To choose a program, it is particularly
useful to consult chapter VI of this
manual ("Programs and specific applica-
tions").
egardless of the category you selected
R
in the previous step, a list containing
a select number of programs appears
on the screen.
4a To select the desired program, press
the "+"/"–" key of channel 1 (to go up or down),
until the desired program is displayed in
white characters on a black background.
4b Press the "On/Off" key to return to the
previous screen.
4c After selecting the desired program,
press the "+"/"–" key of channel 4 which,
depending on the program selected, displays
the symbol or .
START
= the stimulation session starts
a)
START
immediately;
= a parameter setting screen displays.
b)
4b
4a
Fig. 4
3b
manuals search engine

5. Personalising a program

The program personalisation screen
is not available for all programs.
5d
5e
Fig. 5
5a Certain programs require manual selection
of the muscular group that you want to stimu-
late and a figurine is displayed above
channel 1.
To select your desired group, press the "+"/"–"
key of channel 1 (to go up or down). The seven
muscular groups are displayed in succession in
black on the figurine:
vb
Abdomen and Lower back
f
Buttocks
5c Certain programs allow you to adjust the level of work. To do this, press the "+"/"–" key of
channel 3 (to go up or down), until the desired level of work is displayed.
4c
Level 1
5d Total program time in minutes.
By pressing the "On/Off" key, you can
5e
return to the previous screen.
5b The warming-up sequence suggested for
some programs is active by default (an ani-
mated rising convection symbol above the
heater). If you prefer to skip this sequence,
press the "+"/"–" key of channel 2.
5a 5b 5c 5f
Current international standards
require that a warning be given
concerning the application of
electrodes to the thorax (increased risk
of cardiac fibrillation).
c m
Thighs Forearms and Hands
j e
Legs and Feet Shoulders and Arms
Level 2 Level 3
5f To confirm your selection and start the
program, press the "+"/"–" key of channel 4.
Warming-up
No warming-up
td
Thorax and Back
Level 4 Level 5
13