Intended Use; General Safety Instructions For Power Tools - Scheppach ACS3000 Original Bedienungsanleitung

1 x Airless Paint Sprayer
1 x Spray hose 7.6m
1x Spray gun
1x Suction hose
1x Return hose
1x Open ended spanner 19mm
1x Cleaning brush
1x Replacement sealing
1x Instruction manual
1x Warranty card

4. Intended use

This Airless Paint Sprayer is ideal for medium to large
decoration and renovation projects around the house
and garden. It is designed to draw paint directly from
the paint can and its particularly ideal for the cov-
erage of broad surface areas with a high volume of
paint in a short period of time. This includes surfac-
es such as fences, pergolas, sheds, weather boards,
gazebos, garage doors, lattice and walls. The device
is intended for Do It Yourself use only. Refer to chap-
ter 8 for more information on the types of spray able
material that can be used with this device
Please read and familiarise yourself with this user
manual before using the device.
This instruction manual must be passed on together
with the product to the next person to use it.
The device must only be used for its prescribed pur-
pose. Any use other than those mentioned in this
instruction manual will be considered a case of mis-
use. The user, and not the manufacturer, shall be
liable for any damage or injury resulting from such
cases of misuse.
The manufacturer shall not be liable for any unau-
thorised changes made to the tool, not for any dam-
age resulting from such changes.
Please note that the device has not been designed
for use in commercial, trade or industrial applica-
tions. The warranty will be void immediately if this
appliance is used in commercial, trade or industrial
business and equivalent applications.
5. General safety instructions for
power tools
m WARNING! Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
1 Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools cre-
ate sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
2 Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or ground-
ed surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the pow-
er tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduc-
es the risk of electric shock.
3 Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat
or hearing protection used for appropriate condi-
tions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
GB | 29