Temperature Selector - Sentiotec Is1-Serie Montage- Und Gebrauchsanweisung

Instructions for use for the user
● Temperature selector
Here you can set the required temperature. Press buttons 3 and 5 to make the
setting. While the target temperature is being displayed, display 6 flashes. You
can now confirm the set value by pressing 4 or wait 5 seconds until the value is
set automatically.
► Minimum value: 30° C
► Maximum value: 70° C for heater mode, 50° C for foil mode
● Operating time selection
Here you can set the required operating time. Press buttons 3 and 5 to make the
setting. While the required operating time is being displayed, display 6 flashes.
You can now confirm the set value by pressing 4 or wait 5 seconds until the value
is set automatically.
Note: The maximum operating time is restricted by the heating time limit.
See also 7. Adjusting the heating time limit on page 16.
Downloaded from www.Manualslib.com
Operating time
< 99 minutes
99 minutes - 9.9 hours
> 9.9 hours
WORLD OF WELLNESS
manuals search engine
7
8
Setting precision
1 minute
0.1 hours (6 minutes)
p. 20/22
1 hour