Quick Start - Sentiotec Is1-Serie Montage- Und Gebrauchsanweisung

Instructions for use for the user

8.2. Quick start

● Press button 1 to switch on the control unit.
► The current cabin temperature appears in display 6 and display 7 lights up.
You can adjust the required temperature with buttons 3 and 5. While you are
making the setting, display 6flashes.
► Press button 4 to confirm the temperature and display 6 indicates the
Note: If no button is pressed for more than 5 seconds, the control unit
automatically uses the target temperature.
● Now press button 4 to switch to the time symbol 8.
► Press buttons 3 and 5 to set the required operating time.
► Press button 4 to confirm the setting or wait until the control unit makes
► The display now shows the remaining operating time.
Note: Press button 4 to switch between the symbols 7and 8. The display
then shows the respective value:
● Symbol 7: current cabin temperature
● Symbol 8: remaining operating time
Note: Press button 1 to enable the control unit to save the settings when
switched off. When the control unit is switched on again with button 1 the
previous settings are retrieved again.
Downloaded from www.Manualslib.com
current temperature in the cabin.
the setting automatically.
WORLD OF WELLNESS
manuals search engine
p. 18/22