Final Assembly; Final Assembly - Surface Mounting - Sentiotec IS1-Serie Montage- Und Gebrauchsanweisung

Installation instructions, only for experts

6. Final assembly

After all the electrical connections have been made, the control unit can be
mounted.

6.1. Final assembly - surface mounting

To attach the control unit, use the 50 mm screws included in the delivery. Do not
use screws with a larger diameter. This could damage the housing irreparably.
Downloaded from www.Manualslib.com
Work on the housing must only be carried out with a screwdriver. Using
a cordless screwdriver may cause irreparable damage to the housing.
DANGER!
When tightening the screws, be careful not to damage any cables in the
wall. This can lead to severe damage and injury.
WORLD OF WELLNESS
manuals search engine
p. 13/22
EN