Safety Information For The Installer - Sentiotec Is1-Serie Montage- Und Gebrauchsanweisung

Instructions for installation and use

2.2. Safety information for the installer

● Installation may only be performed by a qualified electrician or
similarly qualified person.
● Installation and connection of the infrared control unit may only
be performed when the power supply is disconnected.
● The temperature sensor must be mounted in such a way that
ensures it is unaffected by the inflow of air.
● Observe all regulations applicable at the installation location.
● For your own safety, consult your supplier in the event of prob-
lems that are not explained in sufficient detail in the installation
instructions.
Downloaded from www.Manualslib.com
WORLD OF WELLNESS
manuals search engine
p. 5/22
EN