Basic Cleaning - Blaupunkt 5CG 24010 Montage- Und Gebrauchsanweisung

Start-up
(18
)
11. Press the covers (19) onto the sliders
(18).
12. Check whether the doors open and
close smoothly and whether
appliance door closes tightly.
If necessary, adjust the standing
position of the refrigerator and the
position of the sliders and drag rails.
13. If the doors can be opened and closed
without difficulty, screw the refrigerator to
the built-in cabinet. For this purpose, use
3 short screws (23) for the top and the
two long screws (22) for the bottom.
(19
)
the
(23)
(22
)
(24
)
14. With the door open, press the sealing
strip into the gap between the
refrigerator and the built-in cabinet. The
installation is then complete.

Basic cleaning

In order to remove the odour typical of all
new appliances, clean the appliance before
you use it (see "Cleaning the refrigerator
compartment" and see "Defrosting and
cleaning the freezer compartment" on page
45).
You can find all the important
information about operation starting
on page 37.
Page 52