Setting The Duration; Setting The End Time - JUNO JB121D0 Benutzerinformation

Clock function
00:00 Count Up Timer
Setting and changing the time
After the first connection to the mains, wait
until the display shows
flashes.
1. Press or
2. Press .
3. Press or
4. Press .
The display shows the new time.
To change the time of day press
and again until

Setting the Duration

1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Press or
Duration.
4. Press or the Duration starts
automatically after 5 seconds.
5. Press or
Duration.
6. Press or the Duration starts
automatically after 5 seconds.
When the set time ends, the signal sounds
for 2 minutes. The display shows flashing
and time setting. The oven turns off.
7. Press a sensor field to stop the signal.
8. Turn off the oven.

Setting the End Time

1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
Application
To set the count up, which shows how long the oven
works. It is on immediately when the oven starts to heat.
The Count Up Timer is not turned on if Duration and End
Time are set. This function has no effect on the operation
of the oven.
and 12:00. "12"
to set the hours.
to set the minutes.
again
starts to flash.
to set the minutes for
to set the hours for
3. Press or
and press . First you set the
minutes and then the hours.
When the set time ends, the signal sounds
for 2 minutes. The display shows flashing
and the time setting . The oven turns
off automatically.
4. Press a sensor field to stop the signal.
5. Turn off the oven.
Setting: Time Delay
1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Press or
Duration.
4. Press .
5. Press or
Duration.
6. Press .
The display shows flashing
7. Press or
and press . First you set the
minutes and then the hours.
The oven turns on automatically later on,
works for the set Durationand stops at the
set End Time. When the set time ends, the
signal sounds for 2 minutes. The display
shows flashing
The oven turns off automatically.
8. Press a sensor field to stop the signal.
9. Turn off the oven.
to set the End Time
to setthe minutes for
to set the hours for
.
to set the End Time
and the time setting .
13