Product Description And Specifications; Intended Use; Product Features - Bosch 0 607 453 Serie Originalbetriebsanleitung

OBJ_BUCH-1654-005.book Page 18 Friday, September 16, 2016 1:20 PM
18 | English
 When universal rotary couplings (bayonet couplings)
are being used, retaining pins are required. Use Whip-
check hose restraints to protect against failed hose
connections or the connection between hose and pneu-
matic tool.
 Never carry the pneumatic tool by the hose.
Symbols
The following symbols could have a meaning for the use of
your pneumatic tool. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the pneumatic tool in a better and safer man-
ner.
Symbol Meaning
 Before installing, operating, re-
pairing, maintaining and replacing
accessories as well as prior to
working near by the pneumatic
tool, please read and observe all in-
structions. Failure to follow the fol-
lowing safety warnings and instruc-
tions may result in serious injury.
W Watt
Nm Newton metre
kg Kilogram
lbs Pounds
mm Millimetre
min Minutes
s Seconds
Revolutions or motions per
-1
min
minute
bar bar
psi pounds per square inch
l/s Litres per second
cfm cubic feet/minute
dB Decibel
QC Quick-change chuck
Symbol for hexagon socket

Symbol for external drive
US fine thread
UNF (Unified National Fine
Thread Series)
G Whitworth thread
NPT National pipe thread
Right rotation
Left rotation
1 609 92A 37K | (16.9.16)
Product Description and Specifica-
tions
fold the fold-out page with the illustration of the pneumatic
tool and leave it open.

Intended Use

The pneumatic tool is intended for driving in and loosening
screws as well as for tightening and loosening nuts within the
given dimension and power range.

Product Features

The numbering of the product features refers to the illustra-
tions on the graphics page. The illustrations are partly sche-
matic and may differ from your pneumatic tool.
1 Tool holder
2 Housing sleeve
3 Protective sleeve
Power output
4 Clamping area (collar)(e. g. for an auxiliary handle)
Unit of energy
5 Connection socket at air intake
(torque)
6 Hose fitting
7 Utility clip
Mass, weight
8 Rotational direction switch
Length
9 On/Off switch (lever)
10 Auxiliary handle*
Time period,
duration
11 Exhaust-air hose, central
12 Hose clamp
No-load speed
13 Supply-air hose
14 Sleeve of the quick-change chuck
Air pressure
15 Adjustment tool
16 Adjustment disc
Air consumption
17 Snap ring
18 Support ring
Unit of relative
19 Spring of the quick-change chuck
loudness
20 Clamping bushing
21 O-ring
22 Securing ring
Tool holder
23 Clutch spring
24 Ball
25 Clutch
*Accessories shown or described are not part of the standard de-
Connecting thread
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Rotational direction
Autogoods "130"
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, un-
Bosch Power Tools