Designed Use - Siemens CKA4820 Betriebsanleitung

Foreword

Designed use

60
Siemens Building Technologies
Fire Safety & Security Products
This product is designed for use in general CCTV applications in living, business or
industrial environments.
The device must be installed according to the currently valid installation regulations
to guarantee the designed use and to prevent EMC problems.
The EU conformity certificate which is available for the associated authorities
according to the above-mentioned EU guideline is held at:
Siemens Building Technologies
Fire & Security Products GmbH & Co. oHG,
Siemensallee 84
D-76187 Karlsruhe
Your attention is drawn to the fact that the contents of this Instruction Manual are not part of a
previous or existing agreement, commitment or statutory right and do not change the latter. All
commitments on the part of Siemens are contained in the respective sales contract which also
contains the complete and solely applicable warranty conditions. These warranty conditions in the
contract are neither extended nor limited by the contents of this Instruction Manual. Should you require
further information on this device, or should particular problems occur which are not handled in
sufficient depth in this Instruction Manual, you can obtain the required information from:
Siemens Building Technologies
Fire & Security Products GmbH & Co. oHG,
Siemensallee 84,
D-76187 Karlsruhe,
Tel.: +49 (0) 721/595-1
Connection, commissioning and maintenance must only be carried out by
suitably qualified personnel.
ATTENTION
Correct and safe operation of this device is dependent on proper transport,
storage, installation and connection, as well as careful operation and
maintenance.
01.2005