Siemens CKA4820 Betriebsanleitung Seite 102

Operation
102
Siemens Building Technologies
Fire Safety & Security Products
Please also refer to the information in the respective Instruction Manuals of the connected devices.
Parameterization
In operating mode "SISTORE AX connected to COM1 or COM2", the keys F1 to
F10 are parameterized as follows:
To select the SISTORE AX and monitors, enter the key sequence as shown in the
following table. You must start again if you do not press the next key within three
seconds. Example:
Key sequence / Joystick
Using the joystick
(switchover to telemetry – no PTZ signal on the AX)
or MEM
or (toggle mode)
ZOOM In key
ZOOM Out key
Focus infinity key
Focus 0 key
The corresponding symbols (e.g. for SISTORE AX) are also printed on the film
strip (scope of supply) which can be inserted above the F keys.
Description
(see keys on SISTORE AX)
Left, right, up, down
Switchover to PTZ (toggle mode)
Menu
Display
Sequence
Search
Recording start/stop
Play/Pause
Freeze frame
Alarm
ENTER key
Rewind
Previous image
Next image
Forward
Stop
01.2005