Auriol HG06061A-DCF Bedienungs- Und Sicherheitshinweise Seite 50

You may reactivate reception by pressing and holding the
+ / MEM
10
radio tower symbol
You also have the option to set the time manually. For more
details please refer to section Basic settings.
Mounting the outdoor sensor on a wall:
Note: You will require an electric drill and a cross head screw-
driver for this step.
CAUTION! DANGER TO LIFE, RISK OF INJURY
AND MATERIAL DAMAGE! Read the operating and
safety instructions for your drill carefully.
DANGER TO LIFE! Take care that you do not hit electricity,
gas or water lines when you drill into the wall. If necessary,
check with a pipe and cable detector before drilling.
Mark the position of the hole (Ø approx. 6 mm) on the wall.
Drill the hole with an electric drill.
Insert the dowel
Using a cross head screwdriver, screw the screw
the dowel.
Hang the outdoor sensor by placing the hanger
according screw.
Note: Ensure that the outdoor sensor shouldn't be immersed into
water and not contact with direct sunlight. Electronic devices may
adversely affect the wireless signal reception.
50 GB/IE
and – / CH button
in the time panel
into the drilled hole.
28
for three seconds until an
9
becomes animated.
5
into
27
to the
21