Studer OnAir 2000 Betriebsanleitung Seite 118

OnAir 2000 Digitalmischpult
D14/4 Diagnose
Diagnostics and Error Handling – Flash Checksum Tests
Error ID Type Indication
56 Warning yes
57 Warning yes
58 Warning yes
59 Warning yes
Diagnostics and Error Handling – PC-Card Battery Tests
Error ID Type Indication
060 Information yes
061 Warning yes
Diagnostics and Error Handling – Flash Checksum Tests
Error ID Type Indication
62 Warning yes
63 Warning yes
Error ID Type Indication
064 Information yes
065 Information yes
066 Information yes
067 Information yes
068 Information yes
069 Information yes
Error ID Type Indication
080 Information yes
081 Information yes
096 Information yes
097 Information yes
098 Information yes
099 Information yes
100 Information yes
101 Information yes
102 Information yes
103 Information yes
104 Information yes
105 Information yes
106 Information yes
107 Information yes
108 Information yes
109 Information yes
110 Information yes
SW V3.0
Diag. Box Error Text (Conflict)
yes Flash Verification - Console Configuration corrupted!
yes Flash Verification - Current Console State corrupted!
yes Flash Verification - Snapshot Block Checksum Verification
Failure! [n] of [m] Global Snapshots loaded.
yes Flash Verification - Mic Setting Block Checksum Verification
Failure! [n] of [m] Global Mic Settings loaded.
Diag. Box Error Text (Conflict)
yes PC-Card Slot [%] – Card battery low. Replace battery
immediately!
yes PC-Card Slot [%] – Card battery dead. Replace battery
immediately!
Diag. Box Error Text (Conflict)
yes Flash verification – Snapshot Block Checksum Verification
failure! [n] of [m] Private Snapshots loaded.
yes Flash verification – Snapshot Block Checksum Verification
failure! [n] of [m] Private Mic Settings loaded.
Configurator
Diag. Box Error Text (Conflict)
yes Load Configuration Failure due to channel type mismatch!
Channel [n] input parameters not reconfigured.
yes Load Configuration Failure due to missing Channel Data in
Configuration File! Channel [n] - [m] not reconfigured.
yes Load Configuration Failure due to missing Input Data in
Configuration File! Channel [n] Input 3 - 6 not reconfigured.
yes Restore Configuration Failure due to channel type mismatch!
Channel [n] not restored during EXIT.
yes Restore Configuration Failure due to number of channels
mismatch! Channel [n] - [m] not restored during EXIT.
yes Restore Configuration Failure due to number of inputs
mismatch! Channel [n] Input 3 - 6 not restored during EXIT.
Snapshot Controller
Diag. Box Error Text (Conflict)
yes Snapshot Recall not completed due to missing Input Data in
Snapshot! Channel [n] Input 3 - 6 not recalled.
yes Snapshot Recall not possible due to corrupted Snapshot
Data!
yes Not enough memory to load all Presets into Console - [n] of
[m] Presets loaded!
yes Not enough memory to load all Global Snapshots into
Console - [n] of [m] Global Snapshots loaded!
yes Not enough memory to load Private Snapshots into Console
- [n] of [m] Private Snapshots loaded!
yes Snapshot Recall Failure due to channel type mis-
match! Channel [n] not recalled.
yes Snapshot Recall not completed due to missing Channel Data
in Snapshot! Channel [n] - [m] not recalled.
yes Not enough memory to load all Mic Settings into Console -
[n] of [m] Presets loaded!
yes Mic Setting not created - Input must be of type microphone!
yes Mic Setting not recalled - Input must be of type microphone!
yes Mic Setting not recalled due to corrupted Mic Setting Data!
yes Snapshot not loaded because user [%s] (owner of the
Snapshot) is not defined on this mixing console!
yes Mic Setting not loaded because user [%s] (owner of the Mic
Setting) is not defined on this mixing console!
yes Not enough memory to load all Private Mic Settings into
console - [n] of [m] Private Mic Settings loaded!
yes Recall not possible as selected Snapshot is not defined!
yes Recall not possible as selected Mic Setting is not defined!
yes Snapshot recall failure - channel [n] not available for insert
assignment! Insert [m] not recalled.
Date printed: 16.11.1999