Operating Mode; Switching On; Setting The Disposal Interval, Heating And Mixing Time - Kessel NS 2 Anleitung Für Einbau, Bedienung Und Wartung

4

Operating mode

4.1

Switching on

Following a successful function check, the grease separator may be
switched on; to do so:
• Switch on the main switch. After a successful system test, the dis-
play <65> shows the
lights up, indicating that the grease separator is ready for operation.
If the 3.8.1 Language menu is displayed after switching on, carry
out initialization (see 3.4.3).
4.2

Setting the disposal interval, heating and mixing time

The disposal interval is designed to ensure the regular discharging of the grease separator. Depending on the
volume of grease in the wastewater, the length of the interval may vary. The grease separator must have been
KHDWHG XS IRU DW OHDVW  KRXUV EHIRUH DQ\ GLVSRVDO VR WKDW WKH FROOHFWHG JUHDVH FDQ ÁRZ RXW
If disposal is carried out late, the operational reliability of the grease separator cannot be guaranteed.
To ensure that the grease is discharged as completely as possible, the grease in the grease separator is mixed
by the mixer motor before discharge. If a mixer motor is present, the duration of the mixing time can be set.
The following parameters have been set as default for normal operation (disposal interval daily).
60 Heating time
62 Mixer motor
2016/05
Operating mode
0 System info menu and the green LED <64>
2 hours
10 minutes
65
60
ÀJ >@
Heat the heating cover of the grease separator
Mixing of the grease
59 / 80
Fettabscheider/Grease Seperator „SE"
ÀJ >@
62
64