Settings, Operating Menu - Kessel NS 2 Anleitung Für Einbau, Bedienung Und Wartung

5

Settings, operating menu

General
The menus are navigated using an operating and a stand-by mode. In operating mode, the system settings
(see 5.1 Menu structure) can be shown and set in the display. If none of the keys is actuated for a period of
approx. 60 seconds, the stand-by mode is activated automatically and the background lighting of the display is
switched off.
Navigation keys for the menu
66 Up arrow
67 Down
arrow
68 ESC
72 OK
Activating operating mode
• Actuate the OK <72> key on the control panel; the background
lighting of the display lights up and the start screen
displayed.
• Actuate OK <72>; level 1 of the menu (see 5.1, Menu structure) is
activated.
Note: The contents of the display may vary depending on the
FRQÀJXUDWLRQ
The number of the respective menu level <63> is shown in the topmost
display line in numerical form.
2016/05
Settings, operating menu
Scroll in the menu
Scroll in the menu
Cancel an entry, back
&RQÀUP DQ HQWU\ QH[W OHYHO
66
68
63
(System info) is
63 / 80
Fettabscheider/Grease Seperator „SE"
67 72
ÀJ >@
Fettabscheider/Grease Seperator „SE"
Datum --,--,--
Uhrzeit
--,--,--
Niveau: -- mm
Pumpe I: Aus
Pumpe II: Aus
Fehler/Meldung/Ereignis (Statuszeile)
72
ÀJ >@