Correct Handling Of The Battery Charger - Parkside PLGK 12 A2 Originalbetriebsanleitung

GB IE
Service
• Never repair damaged
batteries. All battery re-
pairs should be carried
out by the manufacturer or
authorised customer service
centres only.
Special safety directions
for battery-operated
tools
• Ensure that the device is
switched off before insert-
ing the battery. Inserting a
battery into a power tool
that is switched on may
result in accidents.
• Recharge the batteries
indoors only because the
battery charger is designed
for indoor use only.
• To reduce the electric shock
hazard, unplug the battery
charger from the mains be-
fore cleaning the charger.
• Do not subject the battery
to strong sunlight over long
periods and do not leave it
on a heater. Heat damages
the battery and there is a
risk of explosion.
• Allow a hot battery to cool
before charging.
• Do not open up the battery
and avoid mechanical
damage to the battery. Risk
of short circuit and fumes
may be emitted that irritate
the respiratory tract. Ensure
20
fresh air and seek medical
assistance in the event of
discomfort.
• Do not use non-rechargea-
ble batteries!
Correct handling of
the battery charger
• Keep the equipment away
from children and pets.
Children must be super-
vised to ensure that they do
not play with the device.
• Before each use, check the
charger, cable and plug
and have them repaired by
qualified professionals and
only with original parts.
Do not use a defective
charger and do not open
it up yourself. This ensures
that the safety of the device
is maintained.
• Connect the charger only to
a socket with an earth. En-
sure that the mains voltage
matches the specifications
on the charger rating plate.
Risk of electric shock.
• Disconnect the charger from
the mains before closing or
opening connection to the
battery / power tool / de-
vice.
• Keep the charger clean and
away from wet and rain.
Do not use the charger out-
doors. Dirt and the entry of
water increase the risk of
electric shock.