General Safety Directions - Parkside PLGK 12 A2 Originalbetriebsanleitung

General Safety
Directions
Caution! When using
power tools, observe
the following basic
safety measures for the
prevention of electric
shocks and the risk of
injury and fire.
Please read all these
instructions before
using this electric tool
and please keep the
safety instructions.
Careful handling and
use of battery devices
• Charge the batteries only
in chargers that are recom-
mended by the manufactu-
rer. Risk of fire if a charger
that is suitable for a speci-
fic type of battery is used
with other batteries.
• In the power tools, use only
the batteries designed for
the purpose. The use of
other batteries may result in
injuries and risk of fire.
• Keep the unused battery
away from paper clips,
coins, keys, nails, screws
and other small metal ob-
jects, which could cause
bridging of the contacts. A
short circuit between the
battery contacts may cause
burns or fire.
• If used incorrectly, liquid
may leak from the battery.
Avoid contact with this. In
the event of accidental con-
tact, rinse off with water. If
the liquid gets into eyes, seek
medical assistance. Leaking
battery fluid may cause skin
irritations or burns.
• Do not use damaged or
altered batteries. Damaged
or altered batteries can be
unpredictable and lead to
fire, explosion or risk of
injury.
• Do not expose batteries to
fire or elevated tempera-
tures. Fire or temperatures
over 130 °C can cause an
explosion.
• Follow all instructions for
charging and never charge
the battery or the bat-
tery-powered tool outside
the temperature range
stated in the operating in-
structions. Incorrect charging
or charging outside the
permitted temperature range
may destroy the battery and
increase the risk of fire.
GB IE
19