Symbols On The Charger; General Safety Directions; Correct Handling Of The Battery Charger - Parkside PDSLG 20 A1 Originalbetriebsanleitung

Symbols on the Charger:

The device is part of the
Parkside X 20 V TEAM
series.
Caution!
Read the operating instruc-
tions before charging.
The rcharger is for indoor
use only.
T3.15A
Miniature fuse.
130°C
Protection class II
(Double insulation).
Electrical appliances must
not be disposed of with the
domestic waste.
LED display while charging.
Only insert the rechargeable
battery once the appliance is
ready for use. Risk of injury!
Switch off the device and re-
move the battery before car-
rying out any maintenance
work.

General Safety Directions

Caution! When using
power tools, observe the fol-
lowing basic safety measures
for the prevention of electric
shocks and the risk of injury
and fire.
Please read all these instruc-
tions before using this electric
tool and please keep the
safety instructions.
Correct handling of the
battery charger
• Keep the equipment away from
children and pets. Children
should be supervised in order
to ensure that they do not play
with the equipment.
• Before each use, check the
charger, cable and plug and
have them repaired by quali-
fied professionals and only with
original parts. Do not use a
defective charger and do not
open it up yourself. This ensures
that the safety of the device is
maintained.
• Connect the charger only to a
socket with an earth. Ensure
that the mains voltage matches
the specifications on the charger
rating plate. Risk of electric
shock.
• Disconnect the charger from the
mains before closing or open-
ing connection to the battery/
power tool/device.
• Keep the charger clean and
away from wet and rain. Do
not use the charger outdoors.
GB IE
15