Cleaning - LR-Cal LSP 1000-H Bedienunganleitung

Druckvergleichsprüfpumpen
MANUAL
Pressure comparison pumps

7.3 Cleaning

Cleaning the unit and checking the liquid levels.
Keep the system clean and free from spilt oil or water. Wipe out the surface under the gauge
stands as necessary. Do not use any cleansing solvents as they may damage the seals.
Ensure that the reservoir (3) contains sufficient liquid (min. 1/2 level height, see chapter 3.2) to
carry out any calibra�ons required. If necessary top up the reservoir (3) with the same liquid that
is already being used. Do not mix various types or brands of liquid in the reservoir.
If the opera�ng liquid in the test pump becomes dirty, a�ach a drain to the test connec�on and
use the spindle pump to flush through clean opera�ng liquid. (An angle connec�on is suitable).
The spindle pump should be turned fully clockwise before star�ng.
Wear safety goggles!
Protect eyes from flying par�cles and liquid splashes.
Easy suc�on (and filling) of the opera�on liquid with our hand
suc�on pump, Order-Code
For informa�on on returning the instrument see chapter 9.1 „Return".
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 •
HAP-02
DRUCK & TEMPERATUR Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
LR- Cal LSP-H
LR- Cal LSP-H
, see chapger 10 „Accessories".
DT -Info@Leitenberger.de •
38
www.druck-temperatur.de