Construction And Function; Combination Possibilities; Intended Use - Ottobock 1C50 Taleo Gebrauchsanweisung

► Follow the safety instructions to avoid injuries and damage to the
product.
► Instruct the user in the proper and safe use of the product.
► Please keep this document in a safe place.

1.1 Construction and Function

The 1C50 Taleo prosthetic foot is suitable for walking on various surfaces
and for a wide range of speeds. The heel strike is absorbed by the large,
replaceable heel wedge.
Carbon and polymer spring elements permit perceptible plantar flexion at
heel strike, a natural rollover movement and high energy return.

1.2 Combination possibilities

This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.

2 Intended use

2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
The product is recommended for mobility grade 3 (unrestricted
outdoor walker) and mobility grade 4 (unrestricted outdoor walk­
m°
kg
er with particularly high demands).
The table that follows shows the suitable spring stiffness of the prosthetic
foot, matching the patient's body weight and activity.
Spring stiffness relative to body weight and activity level
Body weight [kg]
up to 51
52 to 58
59 to 67
68 to 77
78 to 88
Normal activity
level
1
2
3
4
5
High activity level
2
3
4
5
6
13