Instructions For The User; Normal Operation; Remote Control; Manual Operation - RADEMACHER RolloPort S2 Bedienungsanleitung

i

Instructions for the user

Notes for use
◆ Check the operator system to determine whether it
moves smoothly the first time the garage door operator
is used.
◆ After some time in use, check regularly to see whether
the door remains horizontal when opening and closing
and whether the spring has enough power to lift the
door. Lubricate all movable parts regularly with a suitable
lubricant.
◆ In the event of a power cut, you can pull the emergency
release and freely move the door manually.
When the power is back, you can operate the hand
transmitter or the wall panel, and the emergency release
will engage automatically.
The door can then be operated again with the hand
transmitter or the wall panel.
1. In the event of a power
cut, the door stops
moving.

Normal operation

◆ Remote control

By pressing the previously set button on the hand
transmitter, the door can be opened, closed or stopped.

◆ Manual operation

In the event of a power cut, the door can be opened or
closed manually as soon as the door operator has been
disengaged (refer to page 56).
2. Once the power is back on,
press the previously set
button (refer to page 50)
on the hand transmitter,
and the door will open.
3. According to the program
memory, the door will open
as far as the upper limit
and then stop.
GB
57