Functional Description/Emergency Release; Important Installation Instructions - RADEMACHER RolloPort S2 Bedienungsanleitung

i

Functional description/emergency release

In the event of a power cut, the door can be operated
manually by pulling the emergency release cable.
There is a risk of injury. The door can fall un-
controllably when it is released (e.g. if the
door is not balanced).
◆ Always close or open the door fully after each release.
◆ The emergency release is not intended for
„everyday use".

Important installation instructions

Before installation check...:
◆ ...whether your door operator is suitable for the type
of garage door and the garage door height.
◆ ...that the door is in a perfect mechanical state. The
door must be smooth running and be balanced.
Check whether it opens and closes properly;
Open the door approx. 1 metre and let go. A
balanced door should now remain in this position.
If not, have your door adjusted by a specialist
company.
◆ The door operation must not be hindered by in-
correctly adjusted springs or by incorrectly func-
tioning door suspensions or door constructions.
During installation there is a danger of injury
STOP
due to the unsecured door falling suddenly.
◆ During the installation work, ensure that there are
no persons in the swivelling area of the garage door.
Faulty installation can result in serious
accidents and injuries.
◆ Observe and comply with all installation instructions.
◆ Fit the actuator for the emergency release at a height
of less than 1.8 metres.
◆ Use only the enclosed mounting materials and only
original spare parts and original accessories.
◆ Any existing door locking devices already fitted to
the door may hinder the correct functioning of the
door and must therefore be removed.
◆ Poor lighting hinders the installation work and can
result in injuries. Ensure that there is adequate
lighting during installation work.
◆ It is possible that during the installation work, you
may not be able to open the door for a short period
of time.
GB
37