Connecting The Door Operator Housing To The Rail - RADEMACHER RolloPort S2 Bedienungsanleitung

Connect the door operator housing to the rail
1. First of all insert the connector (5).
2. Place the rail (4) with the inboard chain
sprocket (supplied pre-assembled in the
rail) over the connector (5).
3. Place the two fixing brackets (2) over the
rail (4) and screw these firmly onto the
door operator housing with the enclosed
self-tapping hexagon screws (6 x 15 mm).
1
2
3
Key
1 = Self-tapping hexagon screw (6 x 15 mm)
2
= Fixing brackets
3 = Microswitch
4 = Rail
5 = Connector
IMPORTANT
Ensure that the microswitch (3) is not damaged
when mounting the rail.
4
5
GB
41