Installing The Cut Device - Dascom Tally T2150S Kurzanleitung

Cutter-en.book Seite 4 Donnerstag, 3. Mai 2007 9:42 09
Installation

Installing the cut device

4
Downloaded from www.Manualslib.com
Make sure that the printer is switched off before beginning to install the cut device.
STOP
manuals search engine
Insert the cut device in such a way that the pin
side slides into the corresponding recess
Move down the left side of the cut device, so that the pin
on the left side slides downwards into the slot
will go.
The pin must be completeley at the bottom of the
STOP
slot .
Quick start guide
on the right
.
as far as it