Cutting Paper - Dascom Tally T2150S Kurzanleitung

Cutter-en.book Seite 12 Donnerstag, 3. Mai 2007 9:42 09
Handling and settings
Adjust Paperway
Menu
1 2 3
TOF
Head
1 2 3
CutAdj= 00/72" *
Set < >
1 2 3

Cutting paper

Online Tractor1
1 2 3
12
Downloaded from www.Manualslib.com
Press the Adjust key.
Online
Char
4
Setup
Press the Cut key.
Online
Cut
4
Setup
Set the desired cutting position by pressing the < or > key. You can select a value
between -99/72" (cutting position up) and +98/72" (cutting position down); 1/72"
Online
Exit
is equivalent to approx. 0.35 mm.
4
Confirm the input by pressing the Set key.
Setup
Press the Setup or the Online key. The printer changes back to the initial status.
The selected value will be retained after switching off the printer.
If the automatic cutting function has been deactivated in the AutoCut parameter
group in the menu, or if the Auto View position has been selected (see Additional
menu parameter), the paper must be cut manually after each printout.
Ensure that the printer is in Online status.
Press the Cut key. The printer feeds the paper to the cutting position and cuts it.
Online
Cut
4
Setup
manuals search engine
Quick start guide