Cutter-en.book Seite 7 Donnerstag, 3. Mai 2007 9:42 09
Quick start guide
Optional paper tray
Downloaded from
www.Manualslib.com
The optional paper tray has to be attached on the rear cover. If you have already
installed the cover, you must remove it before.
Therefore push the rear cover upwards a little and remove it.
manuals search engine
Fasten the optional paper tray with the three screws and the
three washers by means of the allen key.
Use the two knurled screws to fasten the paper stopper in the
desired position on the paper tray.
Finally, install the rear cover as described on page 6.
Installation
7