Cutter-en.book Seite 10 Donnerstag, 3. Mai 2007 9:42 09
Handling and settings
10
Downloaded from
www.Manualslib.com
manuals search engine
Close the tractor flap. Open the coloured latching lever
and align the tractor in such a way that the first printing po-
sition matches the X mark on the printer housing.
Then lock the lever.
Don't remove the green clips
STOP
the tractors, because otherwise a paper jam may
occur.
Align the right-hand tractor to the paper width. Insert the pa-
per. Make sure that the paper is inserted in parallel to the left-
hand tractor. Close the tractor flap.
Do not tension the paper excessively and do not leave slack.
Lock the right-hand tractor.
Ensure that the paper stack is aligned in parallel to the printer
and that the flow of paper remains unobstructed.
Quick start guide
mounted besides