Changing The Paper Type In The Setup Menu - Dascom Tally LA650+ Kurzanleitung

Quick Start-en.book Seite 19 Freitag, 16. Oktober 2009 1:20 13
Quick start guide
Ready Single
Online
M1 EPS Load
1 2 3 4
Setup
Changing the paper type in the
Setup menu
Press the Online key to set the printer to ready status. When the printer receives
data from the computer, the single sheet is automatically loaded. Press the Load
(4) key to load the single sheet before starting the printout.
When you want to change the paper source in the Setup menu, proceed as follows:
Press the Setup key, then the Paprpath key (3).
Select the desired paper path by pressing < (2) or > (3).
Confirm the selection by pressing the Set key (1).
Paper handling
19