Handling And Settings; Changing The Paper Type - Dascom Tally T2150S Kurzanleitung

Cutter-en.book Seite 8 Donnerstag, 3. Mai 2007 9:42 09

Handling and settings

Handling and settings

Changing the paper type

Offline Single
Park
1 2 3
Single Tractor1
ASF-R
1 2 3
Load paper from
Tractor1
1 2 3
Offline
Park
1 2 3
8
Downloaded from www.Manualslib.com
The printer is able to process either single sheets or fanfold paper. Only fanfold
paper can be cutted. If the printer is set for single-sheet mode, you will need to
change the paper type.
This example shows how to select tractor 1 (the recommended paper source). You
can select tractor 2 or tractor 3 in the same way. We recommend to use only one
tractor since the cutting position may change when the paper source is changed.
Ensure that the printer is in Offline status; press the Online key, if necessary.
Press the Park key.
Load
Online
If a single sheet is loaded in the printer, it will be ejected.
4
Setup
Press the Tractor1 key.
If you do not make a selection within 5 seconds, the printer exits the menu without
Next
Online
a change.
4
Setup
The printer changes back to Offline status and the display alternates between...
Online
4
Setup
and...
Press the Online key.
Load
Online
4
Setup
manuals search engine
Quick start guide